RM Solar S Class 20 Instrukcje Operacyjne Pobierz pdf (Strona 10)

1.6 Adjuster code 1

Adju-

ster

Hy-

draulic

Function Setting

range

Factory

setting

Unit Basic setting

Dat.:

Revised

Dat.:

04-06 all Hydraulic variants 1÷1 1 -

Hydraulic variant

1 = Speed (rpm) controlled collector pump on tank (SP) 1

04-20 all eBUS-Addressing 1÷16 16 -

Only ES 5911, not in use:

Addressing the controller in eBUS combination. 16 standard master addresses.

04-36 all eBUS-charging on/off off -

Only ES 5911, not in use:

On = eBUS charging by solar controller activated

Off = eBUS charging by solar controller deactivated, is carried out by another controller in the eBUS combination.

05-04 all Legionella protection temperature 60÷80 60 °C

Set value for the thermal pasteurisation (Legionella protection). Tjis is the temperature at which heat treatment of a

water store as a contra legionella takes place.

Not in use!

05-14 all Legionella protection function 0÷9 0 -

You may specify when and how often the legionella protection function is carried out.

(protective temperature as per Adjuster 5-04)

0 = never

1 = Once each week

8 = Once every day

9 = Always

Not in use!

08-01 all Increase collector tank for charging ON 0÷50 15 K

If the temp. at the collector sensor is higher than the temp. on the tank sensor + set value "08-01" solar charging is

enabled.

08-02 all Increase collector tank for charging OFF 0÷50 5 K

If the temp. at the collector sensor is less than the temp. at the tank sensor + set value "08-02", solar charging is

disabled.

SET

A0805

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Brak uwag

RM Solar S Class 20 Instrukcje Operacyjne Strona 10