RM Solar S Class 20 Instrukcja Obsługi Pobierz pdf (Strona 61)

61 62

What the signs mean:

This is the actual tem-

perature at the panels

This is only a reading

- it cannot be adjusted

A minimum temp

requirement at the

panels for system to

next switch on

It is minimum set tem-

perature. If the

temperature drops

below set temperature

the system will turn off

An actual temperature

reading at the cylinder

This is the temp at the

cylinder

This is the minimum

required temperature at

the cylinder

This is just a reading

Pump speed This is just a reading

Please note: the menu item “additional settings” do not apply for DC12 and have no

function for the DC12

3. Settings

- This mode will be shown on the main display when you press the right button until you

see sign:

Settings•

SET

- Each setting has been marked by key numbers. A list of the key numbers is explained in

the instruction manual for DC 12

- I would like to highlight those which must be re-set so that the controller will work

efciently.

- The settings are divided into the two groups. One is without the password and second

group can be adjusted only with password.

Settings without the password

Key number: 8-62

- Minimum temperature required at the cylinder (pre-set by manufacturer) 60°C.

- Do not set this value above 70

How do you change the value?

While you are on the mode SET, press the TICK button. The key number (8-62)

will appear below hydraulic scheme. Press enter again and the pre-set value starts

ash. With right or left button you will be able to change the value. Press the TICK

button again. When you press the right button you will go to following key number

which is 8-63 and after another press to 8-85.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 67 68

Komentarze do niniejszej Instrukcji

Brak uwag

RM Solar S Class 20 Instrukcja Obsługi Strona 61

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Nie RM Solar S Class 20